Hp Printer Error Code List 

Printers use weird language. They won’t just tell you what’s happening when something is wrong with them. Instead, they will send off a strange jumbled string of digits and expect you to know what that means. How rude! Fortunately, we’re here to provide you with An extensive HP printer Error Code list!

  1. HP error: “Printer in Error State.”
  2. HP error: “3F0 Error” or “Not Found Boot Device “
  3. HP error: “Error 59.F0.”

“Printer In Error State” – 1 HP Error"Printer In Error State" – 1 HP Error

This HP printer error is standard when sending a document for printing. The error note indicates that the printer is either turned off, not correctly connected to your computer or missing an internet connection. Another possible reason for the general error state is that your HP printer runs low on paper or ink.

To Fix The Error, Try The Next Steps:

  • Variety is sure the printer remains turned on. You can also restart together the printer and your computer.
  • Check if the printer remains connected to your computer or WI-FI network.
  • Make sure your printer’s paper tray is loaded and that the printer has enough ink.
  • If the error still occurs, contact HP printer support.

Best Solutionhttps://www.hpprintersupportpro.us/blog/hp-printer-in-error-state/

“3F0 Error” – 2 HP Error_3F0 Error_ – 2 HP Error

The HP hard drive error 3F0 may occur when the hard disk does not support the system boot process. The cause can be a rigid drive connection issue, an incorrect boot sequence in the Basic Input-Output System (BIOS), a malware attack, or a damaged hard drive.
If you are facing HP error 3F0 and the boot device is not working, solve the problem by following these simple steps:

Hard Reset: You can erase all information in the computer’s memory by performing a hard reset. It forces the system to reestablish the connection between the hard drive and the BIOS.

  • BIOS Settings: Restoring the BIOS default settings in the BIOS Setup section is another possible solution. After the reset, restart your computer and check if the error still occurs.
  • Hard Drive Test: Use HP PC Hardware Diagnostics to run a quick or extensive test and review the error log afterward.
  • Hard Drive Reseat: If the first steps did not solve HP error 3F0, check if your hard drive is damaged or needs to remain reseated.

Best Solution: https://support.hp.com/sk-en/document/c01443463

“Error 59.F0” – 3 HP Error

The HP printer error 59.F0 indicates a problem with your HP printer’s internal motor. The most common cause of the problem is the failure in transfer alienation, meaning that the ITB is stuck and unable to rotate. Error 59. an issue with the SR9 sensor can also cause f0.

To solve the issue, reset the printer settings and remove the surge protector. If this does not solve the problem, reset the ITB and check its internal connections. If the ITB is damaged, you may have to replace it to eliminate the HP error.

Best Solution: https://www.printerfixes.com/how-to-fix-hp-printer-error-59-f0/

How to Clear HP Error Codes on Your Printer

In most cases, a simple printer cable with reset will clear the HP error message by following these simple steps:

  • Turn the printer on (unless it remains already switched on).
  • Wait until the printer remains in stationery mode before you continue.
  • While the printer is on, unblock the power cable from the back of the printer.
  • Eliminate the power cord from the plug socket.
  • Pause for at least 60 seconds.
  • Plug the power cable back into the mass socket and reconnect the power cable to the back of the printer.
  • Turn on the printer.
  • Wait until the printer remains silent and see if this has emptied the error message.

If the reset doesn’t work, look through the HP error codes underneath to find a problem and Solution. Also, check your printer guide for further information.


If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Ensure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the writing remains not jammed.